Many boat owners will ask this question, ‘what is the best anchor for my boat?’ The anchor which holds your boat ought to be given the same weight as the boat itself. Knowing the anchor that will serve you better isn’t easy. Anchors that you can choose from in the market are quite many. Buying you next anchor should be very complicated since you have this article to guide you.
Using a small boat is not like having the large boat, here you use anchors like, the fluke and the plow, that are ideal in the protected inland waters. Of all the anchors available, the flue anchor is the most popular. It is also known as the lightweight. It can also be known as the Danforth. The main feature with this anchor is that it is easy and light. The anchor functions better when you are dealing with the flat surfaces that are either muddy or sand. It is not meant to be subject to the rocks. The ability of the anchor to hold a lighter boat compared to the other types is that we refer to as the holding-power-to-weight ratio.
The other type is the plow anchor. This has the best all-around holding ability in the bottom conditions. The anchors have been set to change their preset settings in the case where the wind changes its direction. The best places these anchors will hold better is either on the grass, mud or on the sandy conditions. One thing they lack is the projecting flukes thus they may foul easily. The plows are mainly used by the heavier powerboats or cruising sailboats.
Before making the purchase you need to understand how big or small your boat is. When the size of your boat is right you will not any problems dealing with your anchor. When the anchor is bigger, the better for you. A properly sized anchor could save your boat for instance if the engine fails as you drift towards the shore.
The anchors holding power is what contains the anchors quality. The weight of the anchor and also its size will determine the holding power. A resistance is normally created every time the anchor penetrates the seabed. When you are dealing with the coral bottoms, the anchors can’t dig but has to hold. The holding power when you are using the modern anchors is quite easy. It is mainly 10 to 200 times the anchor’s weight.
The other factor that you must always consider is where you will be landing. What are your bottoms? Sand, rock or mud are some of the bottoms that there is. Every anchor needs some resistance to hold the boat well. This enables it to withstand and environmental factors that act against the boat. Your anchor design should, therefore, be well selected considering this.